Learn How To Change The Password Of Wireless Repeater

While you do your Repeater setup you need to login to myrepeater.net for hassle-free access to the login page of your wireless n wifi repeater. You can make basic configuration settings or advanced network or firmware settings all just by logging into http//myrepeater.net and accessing the wireless repeater’s login page. One of the best things is that you can change your wireless repeater’s password anytime if you feel there is a threat to its security. In this blog, we will explain how to log in to your wireless repeater using myrepeater.net and change the username or password of your repeater.

Steps To Do The Repeater Set Using An Ethernet Cable:

1. Connect your wireless repeater to your PC device with the help of an Ethernet cord.
2. Open your desired web browser and in that enter 

http//myrepeater.net and press enter to proceed.

1. A dialog box will pop up on your screen, enter the username and password correctly in the respective fields.
2. If you don’t know the username and password, the ‘admin’ is the default credential for both fields.
3. Choose from the access point mode or wifi repeater mode accordingly when prompted.
4. Now, type in your network name or SSID and password that you want to set for your wifi repeater.
5. Hit the finish tab to apply all the settings that you have made.
6. Finally, attach all your wireless devices to the wireless repeater once again.

Steps To Do The Repeater Set Using The Wifi Protected Setup:

• To start, first, attach your wireless repeater to the electrical socket.
• Look for the WPS button on your wifi repeater and press it for nearly 8-10 seconds.
• Then, on your home wifi router press the WPS button for almost 10 seconds.
• The LED light on the repeater will turn solid green implying the successful connection between the wifi router and repeater.
• Repeat the process in the case, only one wifi LED is lit.
• Then, hit the WPS button on both devices again.
• Finally, connect to your wifi repeater’s extended network by opening your web browser and searching myrepeater.net or 192.168.10.1 to access the repeater’s login page.
• On the next page, enter ‘admin’ as your username and password.
• To finish the wireless repeater setup, you must follow all the on-screen instructions and guidelines.

Steps To Change The Wireless n Wifi Repeater’s Username And Password:

• First, you have to switch on the repeater and connect your device to the repeater’s signal. Its network name might be wifi repeater.
• Then, open the web browser on your system and enter myrepeater.net in the address field.
• To access the login page for your wifi repeater, enter ‘admin’ in both the username and password fields.
• Then, you have to choose the mode in which you want to set up your repeater, i.e. access point mode or repeater mode.
• Then, give a new network name to your wifi repeater and enter the desired password.
• Then, hit the save button to apply the new settings to your wireless repeater.

Password Updated!

That’s it! Now you know how to do the wireless repeater setup on http//repeater.net. To access the settings, or change the username or password of your wifi repeater log onto myrepeater.net with the correct credentials. Then, by following the above guidelines you can easily modify the repeater’s settings. Ensure that you follow the guidelines carefully.