Troubleshooting Tips To Fix Tplinkrepeater Setup And Installation Issues

 

When you try to set up and install your TP-Link repeater using tplinkrepeater.net or myrepeater.net and then you face installation issues it can be quite frustrating. This is because tplinkrepeater.net and http//myrepeater.net are two official handles for setting up your TP-Link wifi repeater. Now, let us see what kind of issues you face while setting up and installing your TP-Link wifi repeater and how to fix them with basic troubleshooting.

TP-Link Wifi Repeater Issues And Their Solutions:

1. View LED light status to check the setup error:

The LED lights on the TP-Link wifi repeater tell the network status by their behaviour of flashing. Let’s understand what they indicate;

  • When a blue LED is lit it implies that the router and repeater are successfully connected at an optimal location.
  • A red LED light implies a weak connection and there is a need to move the router and repeater closer to each other.
  • When the LED light is flashing then it indicates that the connection is being established. 
  • In case of no LED light, it indicates that there is no active internet connection.

2. Unable to configure the TP-Link wifi repeater:

When you are unable to visit the tplinkrepeater.net web page then follow the below-mentioned guidelines to check with this issue;

  • Check your internet connection and see if it has blocked the access to tplinkrepeater.net web page.
  • Make sure the devices are properly connected to each other.
  • Sometimes a particular web browser does not allow access to a particular website, in that case, try using another internet browser.
  • Reset your TP-Link wifi repeater to get it back to the default values

3. The TP-Link repeater unable to connect to internet or wifi devices;

  • If you have not done the TP-Link wifi repeater setup properly then you won’t be able to connect to a network router or not receive signals even after connecting to a router network or the internet speed will be low. 
  • Make sure you have done the installation properly;
  1. Do not keep the TP-Link SSID same as that of the primary wifi router. Create a new and unique network name.
  2. Check the LED light for the signal status and in case it indicates weak signal strength, try adjusting the repeater near to the wifi router.
  3. Take a speed test of the wifi repeater. 

TP-Link Wifi Repeater Issues And Fixes Wrapped Up! 

So, that were a few issues that you could come across with your TP-Link wifi repeater along with their solutions. The LED indicators play a very important role in communicating your wifi repeater’s performance with you so keep a check on them. While setting up your repeater make sure that both the repeater and router device are kept in close vicinity to establish a strong connection. Also, set up and install your wifi repeater only via tplinkrepeater.net or myrepeater.net. Other than tplinkrepeater.net, http//myrepeater.net is the only reliable source for TP-Link wifi repeater setup and installation.

Comments

Popular posts from this blog

How to troubleshoot repeater.asus.com is not working issue?

Repeater.asus.com: Setup The Asus Repeater

What Are The Steps To Upgrade The Firmware Version Of Wireless N WiFi Repeater?